The Fat Penguin Eco

When something smaller just won’t do

The original version of the Fat Penguin has now been discontinued, and replaced with an even more efficient Ecodesign version. Yes, really!

The Fat Penguin has all the features of the Hungry Penguin. It will warm you, feed you and make you a brew but it’s even bigger. The output is still 5kW but this is a bigger, bolder penguin. Strong, simple lines, clear view of the roaring fire. Gorgeous in green, confident in black, radiant in red.

What’s More

The Fat Penguin has a 5kW fire box, a top oven and top plate, just like the Hungry Penguin, but the side convection panels make it wider. The extra width means a bigger top plate, so if you are cooking on it you will have more room.

Penguin Facts

All our cooker models have an oven box and top plate (oven top surface). The Fat Penguin comes out with a stainless steel oven bottom trivet, to put cooking dishes on. The oven temperature can reach up to 300°C, but it will tick over comfortably between 140-180°C. You can fit a small saucepan and kettle on the top plate. If you regularly use the top plate there is an optional stainless steel top plate available. This sits on top of the stove and has a U shaped cut out for the flue. There is a small vent hole at the rear of the oven box to allow cooking smells to escape up the flue.

Extra Height Oven (Tall order)
The Fat Penguin is also available with an extra height oven. This increases the internal oven height to a total of 200 mm.

All Prices shown are RRP and include VAT
All eco stoves now come with a factory fitted SMOKE CONTROL kit.

Penguin black is the standard colour, supplement charged for other colours

Technical

• Nominal Output 4.8kW
• Efficiency 86.6% Seasonal 76.6%
• CO Content @ 13% O2 0.06%
• Particles at 13% O2 12mg / m3
• Dimensions Width 460mm, Depth 365mm, Height 638mm
• Internal Oven Dimensions Width 250mm, Depth 220mm, Height 100mm
• Multi-Fuel
• Smoke Control Kit Pre-Fitted
• Optional Direct Air Kit Available
• Max Log Dimensions 270x100mm
• Flue Collar Diameter 127mm
• Flue Size Required Min 125mm
• Distance to combustibles - With Flue Sides & Rear 250mm, Above 450mm
• Distance to non combustibles Side 100mm, Rear 50mm, Above 150mm
• Constructional hearth Type 12mm
• Weight 98kg
• Tested to EN13240 & EN13240A2:2004